Bare Aluminium Foil

Specification

Soft Aluminium Foil one side Matt and other side Bright or Both side Bright.

Application

1. To manufacturing the LDPE laminated pharmaceutical strip foil suitable for packing the tablet, and capsules.

2.     Suitable for Lidding Foil in certain cases with LDPE lamination or by doing the HSL coating. 3.      Any other use with the consent of manufacturer.

Compliances The product is fully compliant to the tests of FDA, REACH, RoHS and anti-microbiological

Detail Description of the product

Foil Rolled from Aluminum Alloy - AA 8011 grade imported foil stock conforming to ICH Q3D Schedule, Rolled with FDA approved consumables and international guidelines on Health and Safety.

Standard Foil Gauge (mm)

Tolerance Limit (±8%)

0.025

± 0.0020

0.030

± 0.0024

0.040

± 0.0032

Tolerances of Foil Gauge and Unit Weight:

 

Foil Gauge mm

 

Thickness mm (±8%)

 

Unit Weight g/sq.mtr. (±8%)

Yield -Standard

Lower Value

Standard Value

Sq Mtrs./Kg

Lower Value

Standard Value

Upper Value

Sq Mtrs./Kg

0.025

0.0230

0.025

0.0270

62.33

67.75

73.17

14.76

0.030

0.0276

0.030

0.0324

74.80

81.30

87.80

12.30

0.040

0.0368

0.040

0.0432

99.72

104.4

117.07

9.57

Mechanical Properties.

 

Foil Gauge (mm)

 

Wet-ability

 

Surface

 

Temper

Bursting Strength (Kg/sq.cm)

 

Pin Holes (Nos./sq.mtr)

0.025mm

A to C

Matt /Bright

Soft

1.5 Min.

05

0.030mm

A to C

Matt /Bright

Soft

2.3 Min.

NIL

0.040mm

A to C

Matt /Bright

Soft

2.8 Min

NIL

Finishing

Reel Width

As required or within 960 mm

Reel wandering

± 0.5 mm edge wandering

Width Tolerance

±1mm

Outside Diameter

Max. 550 mm

 

Core & Inside Diameter

Aluminium with 76 mm ID suitable for shafts and pneumatic mandrel

 

Joints

With red / brown colored BOPP tape with flap (max 2 per reel.)

Packing and Labeling

Mode of Packing

Sea Worthy Packing

Labeling

Each Reel / Jumbo Roll is identified with a sticker, which is pasted on the top of roll and has got following information: -

Specification/ Gauge/ Width/ Coil no. / Date/ Reel no./                                                                                                              Machine name/ No. of Joints.

Test Certificate: The test certificates provided on observed values with standard parameters or mutually agreed format.

► Above-mentioned specifications are for general guideline only and can be changed as part of continuous improvement programme.

► The final product specification will be made as per customer requirement